Test of a lawnmower equipped with
Processor Multi-Fuels of Paul Pantone
All informations and diagrams are published freely (freeware) and are intended for a private use and a noncommercial use
Created on 10-22-00 - JLN Labs - Updated on 04-03-03
Cliquez ici pour la version Française


The Multi-Fuels Processor of GEET is a new internationally patented technology (US005794601A1) whose inventor is Paul Pantone. This revolutionary system allows the common 4 strokes engines to run with a water/hydrocarbure mixture. It is able to use all types of fuels (gasoline, diesel, kerosene, crude oils and others derived from hydrocarbons...) with its endothermic plasma reactor.
The Multi-Fuels Processor allows also
a significant reduction of pollution generated by the gaz exhaust of almost 85% compared to a conventional engine.
Tests carried out by many industrialists and experimenters already showed that it is even possible to make function an engine equipped with this device with
a mixture of hydrocarbons (20%) and water (80%)...

The device is composed of three principal parts:

The conventional carburettor and the muffler (and its catalytic system) are not necessary any more after installation of the device.


Tests by J-L Naudin of a retroffited lawn mower with the GEET Multi-Fuels Processor

October 21 2000, I was pleased to test myself and this for the first time, a lawn mower been driven by a 4 strokes engine retrofitted with the Multi-Fuels Processor invented by Paul Pantone. All the parts used are standard and come from stores of do-it-yourself and/or hypermarkets ( plumbing departement ). The parts were selected to be more closer to the original plan published freely by Pantone on the Internet network the 11-11-99. You will find at the bottom of this page, the diagram of my current setup under tests which gives me whole satisfaction. The bubbler is a simple metal can of 5 liters. The assembly of the unit was carried out so that the machine can be used in real conditions of use (shearing of grass).

Description and basic principles of the endothermic plasma reactor (by Jean-Louis Naudin) :

The heart of the Multi-Fuels Processor of GEET is a self-inducing plasma generator or a plasma reactor with endothermic reaction.

The endothermic reactor is composed of two coaxial steel cylinders:
- the interior cylinder (threaded at each end), called the pyrolytic chamber (430mm length and 15mm of inner diameter) contains a steel rod of 300mm length and 13mm of diameter (not magnetized before the burning-in). A side of this steel rod is round in order to identify its magnetic polarity after its disassembling. The rod is maintained in the center of the pyrolytic chamber with to 3 small nipples welded at each end.
- the external cylinder (threaded at each end) is a steel tube of 300mm length and 26mm of inner diameter.
The two cylinders are placed coaxialy with two reducing T (showed on the diagram below) placed at each end.

The bubbler is a tank containing a mixture of water and hydrocabures (gasoline, diesel, kerosene, crude oils and others derived from hydrocarbons...).

The hot gas flow coming from the exhaust of the engine circulates by the outside part of the reactor with a strong kinetic energy, that contributes to bring up to very high temperature the steel rod (being used as heat accumulator) contained in the pyrolytic chamber. The gases cross the engine and penetrate then in the bubbler containing the water/hydrocarbures mixture. The vapor of the mixture is strongly aspired by the vacuum created by the engine intake and is pushed by the pressure coming from the exhaust. The kinetic energy of the vapor is increased considerably by the reduction of the diameter in the pyrolytic chamber (by Venturi effect). The combined effect of the high temperature and the increase of the kinetic energy produces a thermochemical decomposition ( molecular breakdown ) of the water/hydrocarbures mixture.

The endothermic reactor forms an Electro-Plasma-Chemical unit (EPC) and it is now possible to create a high-output fuel coming from the decomposition of the water contained in the water/hydrocarbures mixture. This fact is confirmed by the presence of oxygen gaz (O2) in great amount measured in the exhaust.


A close view of the Intake/Exhaust connection of the engine

One break-in period of at least 20 minutes with pure gasoline ( 95LL ) is necessary. The mower was placed so that the axis of the endothermic engine (2) is aligned with the North-South terrestrial magnetic axis. The hot side of the reactor chamber (engine exhaust) is placed towards the North, and this in accordance with the recommendations of Paul Pantone. After this break-in period, the tests of the mower started.
A first successful test was carried out with pure gasoline 95LL, then a second test successful with a mixture of water 50% and gasoline 50%.

A test more surprising were carried out
with
75% of WATER and 25% of gasoline (95 LL) :
the retrofitted lawn mower runs very well in real condition of use...

Starting is done without problem (like a normal mower) with simply a small fuel injection at the input of the admission valve (5) before launching. It is necessary to wait approximately 1 minute so that the engine reaches its optimal operating temperature (approximately 800° C). After this period of temperature setting, the engine of the mower is able to run at full speed. The max turn speed is obtained with the adjustments of the valves 3, 4, 5.

The exhaust gas are very clean and not very odorous.

On 10-22-00, I fully confirm that this lawn mower retroffited with the GEET Multi-Fuel Processor is able to run very well with 75% of water and 25% of gasoline.

Additional comments : The main real interesting fact in the GEET Muti-Fuels processor is that this device is able to use any kind of hydrocarbures like crude oils, methanol, gasoline, various solvents, kerozen, bio-diesel mixed with water....

I have just started my retrofitted lawn mower test phase, more tests will be soon conducted about its efficiency.

Today, I can only say that the GEET Fuel processor works VERY WELL on my own retrofitted lawn mower according to the original Pantone diagram and observations :

  • The exhaust emission of the retroffited engine is far less and cooler than stardard engines,

  • the device operate on unconventional fuels,

  • the retrofit system replace a conventional carburetor.

This device is not a water engine, this device is a 4 stroke engine ( a LAV35 Tecumseh, 3.5HP ) which runs with its own multi-fuels miniature refinery on board... Very usefull for anyone those want to use any sources of hydrocarbures.......

Below some videos of the tests :

You must have installed the application " RealPlayer Video ", freely downloadable with

Click on a picture to see the corresponding video.


The first turns (burning-in of 20mn) of the retrofitted engine with the Multi-Fuel Processor


The lawn mower in action...


Video of the TEST with 75% of WATER and 25% of gasoline...


If you wish to check this fact by yourself, you will find below the real diagram used with my retrofitted lawn mower.

All information and diagrams are published freely (freeware) and are intended for a private use and a non commercial use.

I point out that all the tests must be carried out in the open air and in a wide place and by people qualified to handle the machine being used for the tests. This is an experiment and I decline any responsibility on the possible damage caused during your tests. This being carried out under your whole responsibility.

Click on the diagram above to enlarge

Click here to download the full GEET 5kW Fuel Processor printable diagram ( in Adobe Acrobat PDF format )

A test feedback about the Fuel consumption ( 10-28-00 )


The Paul Pantone Fuel processor has been patented worldwide :

Other similar patents which use the same technology :

Interesting documents :


Return to the BingoFuel project